Tsunami Compressed Air Solutions
Protective Coverings
Contract Manufacturing
  • Fire Sleeve

    - Constructed from a high bulk fiberglass fiber that is woven to produce a hollow sleeve, it is then coated with a thick covering of iron oxide red silicone rubber.
    - Can be easily installed over hoses, cables, tubing or pipes. It offers excellent resistance to molten metal splash, radiant heat, abrasion, corrosive atmosphere, moisture, chemicals, vibration, and electricity.
    - In addition to protecting hoses, cables, pipes, etc., Fire Sleeve can protect operators from incurring scorching burn injuries on hot braided hoses and pipes. Fire Sleeve's excellent moisture resistance makes it ideal for outdoor applications.

    Temperature Capabilities: Rated for 500°F (260°C) continuous exposure, up to 2000°F (1093°C) for 15-20 minutes, and up to 3000°F (1650°C) for 15-30 seconds.

    Dimensional Data: Available in diameters from 1/4" (6mm) to 5" (125mm). Standard length is 100ft (30m). Nominal wall thickness = 0.135" (3.43mm)

  • Suburban Manufacturing INSULTF Sleeve



    INSULTF is a braided fiberglass sleeving that has been heat treated and impregnated with an acrylic binder to reduce fraying and dusting, and improve useability and performance. INSULTF was engineered for applications where temperatures as high as 1200°F (649°C) may be encountered.

    INSULTF may also be used as insulation and protection for small heaters and resistors that operate at high temperatures, and to insulate over soldered connections when exposure to solder melt temperatures is possible.

    - Max Temp: 1200°F Continuous / 2048°F Melt
    - UL Recognized: VW-1
    - For High Temp, Low Voltage Applications
    - Easy to Install; Cuts with Scissors
    - Resists Most Organic Solvents
    - Cut and Abrasion Resistant

  • Suburban Manufacturing INSULTHM Sleeve



    INSULTHM sleeve is an extremely high temperature resistant sleeve which is commonly used as thermal protection for cables, wires, and hoses that are subject to continuous and extreme high temperature environments such as engine manifolds and exhaust systems.

    INSULTHM is braided from fiberglass yarns and coated with high temperature resins. INSULTHM is extremely tough and durable, maintaining its tight structure under extreme vibration, abrasion, mechanical stress and temperature variations. INSULTHM installs easily over a variety of applications to either deflect or retain heat in environments up to 1,200°F (649°C).

    - Max Temp: 1200° F Continuous / 2048º F Melt
    - UL Recognized
    - Resin Coated, Heavy Weight Fiberglass
    - Won't Burn, Melt or Become Brittle
    - Easy to Install; Cuts with Scissors
    - Resists Gasoline and Engine Chemicals
    - Abrasion Resistant